Cavalier L4-2.2L VIN F (2004)
4. Remove the rear transaxle mount through-bolt.
5. Remove the rear transaxle mount bolts.
6. Remove the rear transaxle mount.
Installation Procedure
1. Position the rear transaxle.
2. Start the rear transaxle mount bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle mount through-bolt.
Tighten the bolt to 75 Nm (55 ft. lbs.).
4. Remove the following items from under the transaxle:
^
The wood block