Cavalier L4-2.2L VIN F (2004)
Windshield Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Drain the washer solvent from the washer solvent container.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the washer pump electrical connector.
4. Disconnect the washer pump hose.
5. Using a small flat-bladed tool, remove the washer pump from the washer solvent container.
6. Using a small flat-bladed tool, remove the washer pump seal from the washer solvent container.
INSTALLATION PROCEDURE
1. Position the washer pump seal to the washer solvent container, pressing in until fully seated.
2. Position the washer pump to the washer solvent container, pressing in until fully seated.
3. Connect the washer pump hose.
4. Connect the washer pump electrical connector.
5. Lower the vehicle.
6. Fill the washer solvent container with washer solvent.
7. Inspect the washer system for proper operation.
