chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wiper Gear Box|Service and Repair|Page 8712 > < Wiper Arm Blade Replacement|Page 8708
Page 1
background image

Wiper Gear Box: Service and Repair

WIPER TRANSMISSION REPLACEMENT

TOOLS REQUIRED

-

J 39232 Wiper Transmission Separator

-

J 39529 Wiper Transmission Installer

REMOVAL PROCEDURE

1. Remove the air inlet grille panel.

2. Disconnect the wiper motor electrical connector.
3. Remove the wiper drive system module screws.
4. Remove the wiper drive system module from the vehicle.

5. Using the J 39232 , disconnect the wiper transmission from the wiper motor crank arm.

Wiper Gear Box|Service and Repair|Page 8712 > < Wiper Arm Blade Replacement|Page 8708