chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Seat (Passenger) - Will Not Lock Into Position|Page 5772 > < Interior Body - Nonmetallic Paint Usage
Page 1
background image

Seat Track: All Technical Service Bulletins
Seat (Passenger) - Will Not Lock Into Position

Number:

91-335-10

Section:

10

Date:

MAY 1991

Corporate Bulletin No.:  131025

Subject:
PASSENGER SEAT WILL NOT LOCK 
INTO POSITION

Model and Year:
1989-91 CAVALIER COUPE

Models Affected:
1989 through early 1991 J Coupe, Models, except Cavalier Models with Value Leader Package.

Condition:
The standard passenger seat EZ Entry seat adjuster for 1989-1991 J coupe models may exhibit a no-lock condition when repositioning the seat assembly
forward or backward.

Cause:
The latch return spring on the outer track of the seat adjuster may break when adjusting the seat assembly forward or backward. Once the spring is
broken, the latch on the outer track cannot return to the lock position.

Correction:
Replace passenger seat outer latch return spring as follows:

Remove or Disconnect:

1.

Seat adjuster trim covers.

2.

Seat adjuster-to-floor pan attaching nuts, then remove seat assembly from vehicle.

Seat (Passenger) - Will Not Lock Into Position|Page 5772 > < Interior Body - Nonmetallic Paint Usage