Cavalier/Z24 L4-134 2.2L (1991)
Spoiler: All Technical Service Bulletins
Aero Molding - Loose/Wavy Edge
Number: 91-189-10
Section: 10
Date: February 1991
Corporate Bulletin No.: 071503
Subject:
WAVY UPPER EDGE/LOOSE OR NO ENGAGEMENT OF CLIP ON AERO MOLDING
Model and Year:
1991 CAVALIER Z24 ONLY
CONDITION:
Some 1991 Chevrolet Z-24 models may have Aero Moldings that exhibit one of the following conditions:
1.
Wavy upper edge
2.
Loose or no engagement of clip
CORRECTION:
Condition # 1 refer to illustration and situation # 1. Remove 2.0 mm (3/32") from the top edge of the clip.
Condition # 2 refer to illustration and situation # 2. Remove 2.0 mm (3/32") from the stud openings as indicated and reinstall using 2 self drilling screws
at the locations indicated.
WARRANTY INFORMATION:
Use labor operation B9550
OR B9551
Plus 0.2 hr. straight time
Use applicable Labor Time Guide for labor hours.