chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine - Stalls/No Start/Runs Rough/Code 42 Set|Page 110 > < Fuel Pump Relay|Locations|Page 100
Page 1
background image

Ignition Control Module: Customer Interest
Engine - Stalls/No Start/Runs Rough/Code 42 Set

Number:

91-453-6D

Section:

6D

Date:

NOV. 1991

Corporate Bulletin No.: 136405

ASE No.: A6, A8

Subject:

INTERMITTENT DIAGNOSTIC TROUBLE CODE 42 AND/OR DRIVEABILITY

Model and Year:

1990-91 CAVALIER, CORSICA AND BERETTA WITH 2.2L ENGINE

Condition:

Some 1990-91 J and L vehicles equipped with the 2.2L (LM3) engine may intermittently exhibit one or more of the following
conditions:

*

ECM Diagnostic Trouble Code 42 set, with no trouble found.

*

Engine stalling rough running, with no trouble found.

*

Intermittent no-start, with no trouble found.

*

ECM fuse blown, with no trouble found.

Cause:

DIS (Ignition) module lead wiring may be subject to a rub-through condition at the engine wiring harness bracket where it is mounted at
the transaxle case. In addition, a similar condition may also exist on the transaxle case near the same location, from a sharp edge formed
during case casting, when equipped with manual transaxle.

Engine - Stalls/No Start/Runs Rough/Code 42 Set|Page 110 > < Fuel Pump Relay|Locations|Page 100