Cavalier/Z24 L4-134 2.2L (1991)
Replace both blades with P/N 22110234. Use appropriate labor operation and time.
Coupes and Convertibles only:
If conditions persist, follow the procedure below.
Install spacer package, P/N 22111290, over driver side linkage housing as shown in Figure 1. Make sure spacer is correctly oriented.
Install new screws provided and torque evenly to 8 N-m (70 lbs.in.).
NOTE:
When reassembling cowl, make sure that washer hose is reconnected (and not pinched).
If an interference condition results between the wiper arm head casting and the cowl clearance hole, use a file to enlarge hole at interference point.
This procedure should not be used for 1993 vehicles, as a revised arm has been introduced which incorporates a revised blade angle.
Parts are currently available from GMSPO.
WARRANTY INFORMATION
Labor Operation Number:
T4677
Labor Time:
0.4 hour
Trouble Code:
92