chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Bucket Seat - Material Bulge in Top Backside|Page 10355 > < Restraints - Driver/Passenger Seat Head Rest Information
Page 1
background image

Seat Back: Customer Interest
Front Bucket Seat - Material Bulge in Top Backside

File In Section: 08 - Body and Accessories 

Bulletin No.: 99-08-50-007

Date: April, 1999

TECHNICAL

Subject:
Material Bulge in Top Backside of Front Bucket Seat 
(Add Plastic Tie Straps to Seat Frame)

Models:
1995-98 Chevrolet Cavalier
1995-98 Pontiac Sunfire

Condition

Some customers may comment that there is a bulge (2) in the material on the top backside of either front bucket seat (1).

Cause

The suspension located inside the seat back may have slipped out of position on the seat back frame.

Correction

Reposition the suspension on the seat back frame and secure with a plastic tie strap, using the following procedure:

Important:

Refer to the Seats sub-section in the appropriate Service Manual for additional information on seat removal, disassembly, reassembly and
installation.

1.

Remove the seat from the vehicle.

Front Bucket Seat - Material Bulge in Top Backside|Page 10355 > < Restraints - Driver/Passenger Seat Head Rest Information