Cavalier/Z24 L4-138 2.3L DOHC VIN D MFI (1995)
Clutch Pedal Assembly: Service and Repair
CLUTCH PEDAL AND BRACKET ASSEMBLY
Note: The clutch pedal and bracket are serviced as an assembly.
Remove
1. Negative battery cable.
2. Sound and insulator from inside the vehicle.
3. Clutch master cylinder pushrod from the clutch pedal.
4. Clutch pedal and bracket mounting nuts.
5. Clutch pedal and bracket assembly.
Install
1. Clutch pedal and bracket assembly.
2. Clutch pedal and bracket mounting nuts.
Tighten
-
Nuts to 23 Nm (17 lbs. ft.) starting with the lower nuts.
3. Clutch master cylinder pushrod bushing on the pedal.
-
Lubricate the bushing.
4. Clutch master cylinder pushrod to the clutch pedal.
Adjust
-
Cruise control clutch switch if equipped.
5. Sound insulator.
6. Negative battery cable.