chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Convertible - Top Cover Shows Wear or Permanent Damage|Page 9966 > < Convertible - Top Cover Shows Wear or Permanent Damage|Page 9964
Page 4
background image

Condition may be due to one or more of the following. Refer to Figures 1 - 6.

a.

Sharp edge at top of the rear rails,

b.

Misalignment of No. 4 bow slats,

c.

Protruding back belt molding attaching studs,

d.

Protruding quarter belt tackstrip rivets,

e.

Missing or damaged balance link covers,

f.

Sharp ends at the No. 4 bow.

Correction

Remove convertible top cover. Refer to Topcover Assembly in Section 10-9 of the 1995/96 J-Platform Service Manual Update.

a.

If condition is due to sharp edge at top of the rear rails:

1.

Dress the crown edge to a smooth, approximately 3.18 mm (0.125 in.) radius using a small fine-tooth file. Refer to Figure 7.

Convertible - Top Cover Shows Wear or Permanent Damage|Page 9966 > < Convertible - Top Cover Shows Wear or Permanent Damage|Page 9964