chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Radiator Hose > < Cooling System, A/C - Aluminum Heater Cores/Radiators|Page 2737
Page 1
background image

Radiator: Service and Repair

1. Disconnect battery ground cable, then discharge and recover air conditioning refrigerant.
2. Drain engine coolant.
3. Remove hood latch and both headlight assemblies.
4. Remove radiator mounts, then raise and support vehicle.
5. Remove cooling fan assembly, then lower radiator hose and oil cooler lines.
6. Lower vehicle, then remove hood latch support and forward sensor w/harness.
7. Disconnect upper radiator hose, overflow hose, then compressor and accumulator hoses.
8. Remove radiator/condenser assembly.
9. Reverse procedure to install.

Radiator Hose > < Cooling System, A/C - Aluminum Heater Cores/Radiators|Page 2737