Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
Timing Cover: Service and Repair
ENGINE FRONT COVER
^
TOOLS REQUIRED
-
J28467-A Engine Support Fixture Adapter
-
J28467-400 Engine Lift Hook
-
J 36660 Torque Angle Meter
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Drain and recover the coolant.
3. Remove the coolant surge tank.
4. Remove the serpentine drive belt.
5. Install the J28467-400 onto the generator stud-ended bolt, and support fixture J 28467-A.
6. Remove the upper fasteners from the front cover.
7. Remove the engine mount assembly.
8. Remove the engine mounting bracket adapter.
9. Raise and support the vehicle.
10. Remove the right front wheel and the tire assembly.
11. Remove the right splash shield.
12. Remove the crankshaft balancer. See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair
13. Remove the lower front cover fasteners.
14. Lower the vehicle,
