Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
Crankshaft Position Sensor: Service and Repair
Crankshaft Sensor
REMOVAL PROCEDURE
1. Disconnect the CKP sensor harness connector at the sensor.
2. Remove the CKP sensor to block bolt.
3. Remove the CKP sensor from the engine.
INSTALLATION PROCEDURE
Important: Inspect the sensor O-ring for wear, cracks or leakage. Replace if necessary. Lubricate the new O-ring with engine oil before
installing.
1. Install the CKP sensor into the block.
2. Install the CKP sensor to block bolt.
Tighten
Tighten the bolt to 10 N.m (88 lb. in.).
3. Connect the CKP sensor harness connector.
