chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Cable/Linkage > < Throttle Body|Description and Operation|Page 5833
Page 2
background image

8. Install the air cleaner resonator (2) to throttle body (3).

Important: With the engine OFF, check to see that the accelerator pedal is free, by depressing the pedal to the floor and releasing.

9. Install the negative battery cable.

10. Reset IAC valve pintle position:

1. Turn ignition switch to the ON position (engine OFF).
2. Turn ignition OFF for ten seconds.
3. Start engine and check for proper idle operation.

Throttle Cable/Linkage > < Throttle Body|Description and Operation|Page 5833