Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
2.
1,524 mm (60 in.) long x 25.4 mm (1 in.) wide x 3.2 mm (1/8 in.) thick PVC closed-cell foam tape centered side-to-side to header surface. See
Figure 3.
3.
1,524 mm (60 in.) long x 12.7 mm (1/2 in.) wide x 1.6 mm (1/16 in.) thick butyl tape running from top end of one A-pillar weatherstrip retainer,
up and across the header, overlapping the ditch moldings butyl and to the top edge of the other A-pillar. Do not remove the protective backing
from the butyl tape at this time. See Figure 4.
4.
Header weatherstrip retainer to header.
5.
Screws securing header weatherstrip retainer.
6.
Windshield garnish molding. Refer to Windshield Garnish Molding in this section.
