Celebrity V6-173 2.8L (1989)
3. Lubricate cylinder wall and rubber cups with clean brake fluid, then install spring assembly (25), seals (24), pistons (23) and boots (22).
4. Wipe end of hydraulic line to remove any foreign matter, then place wheel cylinder in position. Enter tubing into cylinder and start threads on
fitting.
5. Secure cylinder to backing plate, then complete tightening of tubing fitting. Torque to 17 Nm (12 lbs. ft.).
6. Install bleeder valve (20). Torque to 7 Nm (65 lbs. in.).
