Celebrity V6-173 2.8L (1989)
17.
Loosen rocker arms, then remove pushrods. Intake and exhaust pushrods are different lengths with exhaust pushrods being longer of the
two.
18.
Reverse procedure to install, noting the following:
a. Place 3 mm bead of suitable RTV sealer on each ridge where front and rear of intake manifold contacts the block.
b. Torque intake manifold attaching bolts to 15 ft. lbs. in sequence shown in Fig. 3, then retighten to 24 ft. lbs. in sequence shown in Fig. 3.
c. Torque all bolts/nuts to specifications.
