chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Position Sensor > < Power Steering Pressure Switch|Locations|Page 446
Page 2
background image

Fig. 043 - Chart C-1E Power Steering Pressure Switch

1.

Checks for ECM signal voltage on CKT 901, and confirms that ground CKT 450 is OK. Optional test for A/C equipped vehicles: With clutch on,
turn the steering wheel against stop. If P/S pressure switch is functioning properly the clutch should disengage.

2.

Maximum resistance, or infinity, indicates an open switch.

3.

Less than 1 ohm indicates that the switch is closed when the power steering pressure is high.
Switch is OK.

Throttle Position Sensor > < Power Steering Pressure Switch|Locations|Page 446