Celebrity V6-173 2.8L VIN X 2-bbl (1985)
Figure 8 - Ring Setting Procedure
2.
Place pinion and valve assembly into clear pinion and valve assembly ring protector J 37090. (Be sure to use only (the clear protector.) Allow to
set for approximately tbree minutes while continuing installation preparation. This allows the valve rings to be properly sized.
3.
Position valve assembly in protector so that valve body is flush with bottom of clear protector. (See Figure 8.)
v Inspect
Inspect valve body rings for cuts, nicks or other damage, proper stating of rings in grooves and engagement of split tabs.
Figure 9 Housing Bore Preparation
