chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Stabilizer Shaft <--> [Stabilizer Bar, Sway Control] > < Brakes - Manual Clarified, Caliper To Knuckle Clearance|Page 6537
Page 1
background image

Lateral Stabilizer Rod: Service and Repair

Fig. 6 Track bar installation

1.

Raise rear of vehicle and support rear axle using a suitable jack.

2.

Remove nut and bolt attaching track bar at axle housing and underbody and remove track bar, Fig. 6.

3.

Reverse procedure to install, Fig. 6. Open side of track bar must face rear of vehicle. Also, nut must be at rear of attachments at both axle and
underbody attachments.

Stabilizer Shaft <--> [Stabilizer Bar, Sway Control] > < Brakes - Manual Clarified, Caliper To Knuckle Clearance|Page 6537