chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins:|856 > < Engine - Stalling While Shifting Into Reverse or Drive|Page 3720
Page 3
background image

The new design solenoid (refer Figure 3) can be used to service all past THM 125C Transaxle models. Remove the side cover and replace the solenoid
and conduit assembly (on car service).
SERVICE PARTS INFORMATION:

P/N

8665016

Solenoid and Conduit Assembly - 1988 KDC Model
Only

8652379

Solenoid and Conduit Assembly - All Other Models

Cars equipped with the 4.3L diesel engine should use the following parts:

8652377

Solenoid and Conduit Assembly - 1982 through 1984
Models

8652376

Solenoid and Conduit Assembly - 1985 Models

To properly diagnose the condition of the suspect Windsor built  Transaxles, assure that stabilized operating temperatures are obtained during
normal road evaluation phase of routine preliminary pre-delivery procedure.

All Technical Service Bulletins:|856 > < Engine - Stalling While Shifting Into Reverse or Drive|Page 3720