Chevelle/Malibu V6-231 3.8L VIN A (1983)
Canister Purge Control Valve: Testing and Inspection
Fig. 020 CHART C-6BC CANISTER PURGE VALVE CHECK
Canister purge is controlled by a solenoid which allows manifold vacuum to purge the canister when de-energized.
-
The ECM supplies a ground to energize the solenoid (purge off).
-
The solenoid is energized (no purge) by grounding the test terminal with the ignition "ON" and engine stopped, or with the engine running if
the following are met:
-
Engine run time less than specified.
