Chevette L4-111 1.8L DSL (1983)
Fig. 15 Fixing camshaft in place with tool No. J-29761
1.
Disconnect battery ground cable.
2.
Remove undercover and drain coolant.
3.
Remove fan shroud, alternator belt, cooling fan and water pump pulley.
4.
Remove ten bolts securing upper dust cover, remove dust cover.
5.
Remove bypass hose.
6.
Bring cylinder No. 1 to TDC, Fig. 12, ensure that setting mark on injection pump pulley is in alignment with front plate, then fix the pulley with 8
mm 1.25 pitch bolt, Fig. 13 and Fig. 14.
7.
Remove cam cover and loosen valve adjustment screws so rocker arms are in a free state. Fix camshaft by installing fixing plate, tool No. J-29761,
into the slit in rear end of the camshaft, Fig. 15.
Fig. 16 Timing belt holder
