Chevette L4-111 1.8L DSL (1983)
FIGURE 6 - Coach Joint
FIGURE 7 - Pressure Application to Access Holes
FIGURE 11 - Bubble Test
B.
Windshield Pillar to Cowl Joint Flange
-
Loosen the fender by removing the top five (5) and two
(2)
rear screws.
-
Pull back the fender to expose the windshield pillar to cowl joint.
-
Bubble test the flange area as per Steps 6-7 of the diagnosis (see Figure 6, 7, and 11).
-
Remove existing sealer using a suitable tool.