chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Slipping in All Ranges|Page 686 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 677
Page 1
background image

Fluid Filter - A/T: Customer Interest
A/T - Slipping in All Ranges

Number:

86-32

Section:

7A

Date:

Feb. 1986

Subject:

THM 125 OR 125C TRANSAXLE
SLIPPING IN ALL RANGES

MODEL AND YEAR:

1980-86 THM 125 AND 125C TRANSAXLE

TO:

ALL CHEVROLET DEALERS

A 1980 through 1986 THM 125 or 125C transaxle may exhibit a slipping in all ranges condition under hard acceleration and/or
maneuvering operations, caused by oil pressure drop due to a cut or improperly seated oil strainer seal.

OIL STRAINER AND SEAL KIT P/N 8652910

OIL STRAINER AND SEAL KIT P/N 8631951

Oil strainer and seal kit P/N 8652910 (refer to Figure 1) can be used to replace oil strainer and seal kit P/N 8631951 (refer to Figure 2)
on a 1980 through 1986 THM 125 or 125C transaxle that exhibits the slipping condition.

Either design can be used to service all years and all models as follows:

SERVICE INFORMATION

A/T - Slipping in All Ranges|Page 686 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 677