chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

P/S - Reduction of Power Assist When Cold|Page 5007 > < Steering - Identifying Rack and Pinion System Noises|Page 5002
Page 1
background image

Steering Gear: All Technical Service Bulletins
P/S - Reduction of Power Assist When Cold

Number:

SUPPLEMENT REISSUE 84-272-3B

Section:

3B

Date:

JUNE, 1988

Subject:

SUPPLEMENT TO:

SPECIAL POLICY ADJUSTMENT TEMPORARY REDUCTION OF POWER STEERING ASSIST WHEN COLD

Model and Year:

1982-84 CHEVROLET CELEBRITY, CAVALIER, CITATION WITH POWER STEERING

TO:

ALL CHEVROLET DEALERS

In order to clarify the procedure concerning drive pin looseness and housing bore groove depth, Chevrolet is providing a supplement for page 10 (Step
B-12) of Dealer Service Bulletin 84-272-3B Reissue.

The reverse side of this bulletin provides a replacement for page 10.

Please attach this supplement to all existing copies of the bulletin. Also be aware of this change while viewing the training video tape previously sent to
your dealership.

-10- Supplement June, 1988

10.

Remove stub shaft dust seal, stub shaft seal, stub shaft bearing annulus assembly, pinion and valve assembly, with spool shaft retaining ring, and
valve body rings attached.

11.

Remove valve body rings from pinion and valve assembly.

Important

Use care when removing rings from valve assembly to prevent damage to valve assembly.

P/S - Reduction of Power Assist When Cold|Page 5007 > < Steering - Identifying Rack and Pinion System Noises|Page 5002