Citation V6-173 2.8L VIN Z 2-bbl HP (1983)
3.
Remove parking brake cables from bracket attachment and position out of way.
4.
Disconnect brake line bracket from frame.
5.
Disconnect shock absorber from lower mounting, then pull spring out of way.
6.
Remove four control arm to underbody attaching bolts and allow control arm to rotate downward.
7.
Remove nut and bolt from bracket attachment and remove bracket.
8.
The bushing can now be replaced using tools shown in Figs. 4 and 5. When installing bushing, press bushing in until end of bushing is aligned
with scribed line on tool J-28685-2, Fig. 5.
9.
Reverse procedure to install control arm. Install bracket to control arm as shown in Fig. 2.
