Citation II V6-173 2.8L VIN X 2-bbl (1985)
Flywheel: Customer Interest
Flywheel - Excess Paint in Mounting Holes
Number:
86-273-6
Section:
6
Date:
APRIL 1991
Corp. Bulletin No.: 136001
Subject:
EXCESS PAINT IN FLYWHEEL MOUNTING HOLES ON GOODWRENCH ENGINE
Model and Year:
1984-85 CITATION 1984-86 CELEBRITY
NOTE:
THIS APPLIES TO GOODWRENCH PARTIAL ENGINES ONLY (P/N 10101781)
Condition:
Incorrect clamp load on Flywheel bolts.
Cause:
Paint accumulation in the Flywheel mounting holes. This will create a false torque condition. The Flywheel may seem to be secure,
however, it will soon begin to move under normal engine conditions and may elongate the mounting holes in the Flywheel.
Correction:
The Flywheel mounting hole threads should be cleaned out with a tap. The holes should be retapped with a M-10X1.5-6H standard tap.
Use Existing Labor Operation Number and Times.
