Citation II V6-173 2.8L VIN Z 2-bbl HP (1984)
-REGULATOR VALVE SPRING
CONVERTER CLUTCH REGULATOR VALVE SPRING ELIMINATED
At the start of 1986 production, the converter clutch regulator valve spring (refer to Figure 2, Item No. 394) was eliminated on the following models of
the THM 440T4 transaxle: CFH, CHH, CMH, CNH, due to recalibration and fluid passage changes. Do not replace this spring on any listed model, as an
increase of the apply feel of the transaxle converter clutch may result. Refer to Figure 1 for transaxle identification information.
Service Manual Reference:
Refer to the applicable service manual, THM 440T4 Automatic Transaxle Unit Repair Table of Contents, for control valve assembly service
information.
