Cobalt L4-2.0L SC (2007)
6. Remove the EVAP canister bolt.
7. Slide the EVAP canister assembly toward the driver side of the vehicle in order to remove.
Notice: The EVAP canister may have released carbon particles which caused this part to fail and may cause damage to other components. Check
the EVAP canister for loose carbon before returning the vehicle to service.
8. If reusing the EVAP canister, inspect the canister for loose carbon particles.
Installation Procedure
1. Insert the retaining tab on the EVAP canister into the slotted bracket on the vehicle underbody.
Notice: Refer to Fastener Notice.
2. Install the EVAP canister bolt.
Tighten the bolt to 10 N.m (89 lb in).
