Cobalt L4-2.0L SC (2007)
Seals and Gaskets: Service and Repair
Output Axle Shaft Sleeve and Seal Replacement
Front Wheel Drive Shaft Seal and Output Shaft Seal Sleeve Replacement - Left Side
Special Tools
-
J 8092 Driver Handle
-
J 41102-1A Axle Seal Installer
-
J 41227 Output Shaft Sleeve Remover
-
J 41228 Output Shaft Sleeve Installer
Removal Procedure
1. Raise the vehicle. Support the vehicle.
2. Remove the left drive axle assembly. Refer to Wheel Drive Shaft Replacement See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair.
3. Remove the snap ring from axle. Discard the snap ring. Do not reuse.
4. Remove the output axle seal.