chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Increase of Head Impact Protection|Page 15298 > < Campaign - Increase of Head Impact Protection
Page 2
background image

Parts Information

Parts required to complete this program are to be obtained from General Motors Service and Parts Operations (GMSPO).

Please refer to your "involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an
emergency situation, parts should be ordered on a CSO = Customer Special Order.

Inspection

Determine if the vehicle is equipped with side impact air bags. Refer to GMVIS to verify vehicle content.

If the vehicle is equipped with side impact air bags, do not perform the service procedure in this bulletin. No further action is required. Submit a claim
for Vehicle is Equipped with Side Impact Air Bags, labor operation V1595 for 0.2.

If the vehicle does not have side impact air bags, refer to the service procedure in this bulletin. Perform Steps 1-4 on the driver's side of the vehicle only.
After performing Steps 1-4, the headliner will drop about 203 mm (8 in), which will provide adequate room to determine if the energy absorbing (EA)
piece has been installed.

If either the interim production or current production/service repair have been performed, re-install the headliner, A-pillar trim panel, and sunshade.

Campaign - Increase of Head Impact Protection|Page 15298 > < Campaign - Increase of Head Impact Protection