Cobalt L4-2.0L SC VIN P (2005)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Release the electric power steering (EPS) wiring harness from the brake pedal bracket.
2. Release the accelerator pedal position (APP) sensor jumper harness from the brake pedal bracket.
3. Disconnect the electrical connector from the APP sensor.
4. Loosen the brake booster mounting nuts.
5. Remove the retaining clip (4) and washer (3) from the brake pedal.
6. Release the brake booster pushrod (2) from the brake pedal.
7. Remove the brake booster mounting nuts.
8. Remove the brake pedal bracket-to-steering column bracket bolt (1).
