Cobalt L4-2.0L SC VIN P (2005)
6. Turn the tensioner plunger 90 degrees in its bore and compress the plunger until a paper clip can be inserted through the hole in the plunger body
and into hole in the tensioner plunger.
7. Install the timing chain tensioner.
8. Tighten the chain tensioner bolts.
^
Tighten the chain tensioner bolts to 10 Nm (89 inch lbs.).
9. Remove the paper clip from the balance shaft drive chain tensioner.
10. Install the oil nozzle and bolt.
^
Tighten the oil nozzle bolt to 10 Nm (89 inch lbs.).
11. Install the crankshaft sprocket with timing mark at the 5 o'clock position.
