Cobalt L4-2.0L SC VIN P (2005)
Heater Core: Service and Repair
Heater Case/Cover Replacement
HEATER CORE COVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the body control module (BCM) from the vehicle.
2. Remove the front floor console left side extension panel.
3. Pull back the carpet at the bottom of the left instrument panel (I/P) center support bracket and remove the left I/P center support bracket nuts.
4. Remove the left I/P center support bracket.
5. Remove the accelerator control pedal from the front of the dash and position out of the way.
6. Raise the center floor outlet duct while pushing the floor ducts down to disengage the ducts.
7. Rotate the center floor outlet duct forward in the vehicle and pull down to disengage it from the HVAC module.
