Cobalt L4-2.0L SC VIN P (2005)
8. Remove the heater core cover heat stakes with a small chisel.
9. Loosen the nut that is behind the fuel line bracket and remove the stud from the dash panel at the heater hoses.
10. Pull the heater core cover down just enough to clear the locating pins from the HVAC module. Slide the heater core cover rearward until the drain
tube clears the front of dash. Slide the heater core cover down, rearward, and to the right to remove.
IMPORTANT: Make certain that all of the heater core cover screws are removed before attempting to remove the heater core cover.
INSTALLATION PROCEDURE
1. Install a new drain tube seal onto the drain tube.
