Cobalt L4-2.0L SC VIN P (2005)
Hose/Line HVAC: Technical Service Bulletins
A/C - Revised Compressor Hose Assembly Replacement
Bulletin No.: 06-01-37-003
Date: March 17, 2006
SERVICE MANUAL UPDATE
Subject:
Revised Compressor Hose Assembly Replacement (RPO LSJ)
Models:
2005-2006 Chevrolet Cobalt
with 2.0L Engine (VIN P - RPO LSJ)
This bulletin is being issued to revise the Compressor Hose Assembly Replacement (RPO LSJ) procedure in the Heating, Ventilation and Air
Conditioning sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
Compressor Hose Assembly Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1.
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2.
Remove the compressor hose from the evaporator hose.
3.
Remove and discard the seal washer.
4.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
