Cobalt L4-2.0L SC VIN P (2005)
9. Replace the front of dash seal.
10. Inspect and replace the following HVAC module seals if damaged:
-
The defrost duct seal
-
The HVAC module to cross car duct seal
-
The center air outlet duct seal
-
The center floor air outlet duct seal
-
The air inlet seal
11. Install the HVAC module in the vehicle.
12. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
13. Leak test the fittings using J 39400-A.
14. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ)) Draining and Filling Cooling System (2.2L (L61)).
