Cobalt L4-2.0L SC VIN P (2005)
Audible Warning Device: Description and Operation
AUDIBLE WARNINGS DESCRIPTION AND OPERATION
The audible warnings alert the driver of a system concern or a critical vehicle condition. The instrument panel cluster (IPC) generates the audible
warnings through a speaker. The IPC receives audible warning requests via the GMLAN serial data line. If the IPC receives multiple audible warning
requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
-
Fast rate chime (200 pulses per minute)
-
Medium rate chime (150 pulses per minute)
-
Slow rate chime (50 pulses per minute)
-
Single chime
Fasten Safety Belt Warning
The instrument panel cluster (IPC) activates the fasten safety belt audible warning as requested by the body control module (BCM). The BCM sends a
GMLAN message to the IPC indicating the chime frequency (slow rate) and duration (8 seconds). The fasten safety belt warning sounds and the fasten
safety belt indicator illuminates when the following occurs:
-
The ignition switch transitions to ON.
-
The BCM detects that the driver seat belt is not buckled (signal circuit is low). The IPC receives a GMLAN message from the BCM indicating the
driver seat belt status.
If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime
stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Key-In-Ignition Warning
The instrument panel cluster (IPC) activates the key-in-ignition audible warning as requested by the body control module (BCM). The BCM sends a
GMLAN message to the IPC indicating the chime frequency (medium rate) and duration (continuous). The key-in-ignition warning sounds when the
following occurs:
-
The ignition switch is OFF.
-
The BCM determines that the driver door is open (signal circuit is low).
-
The BCM determines that the ignition key alarm switch is closed (signal circuit is low).
Lights On Warning
The instrument panel cluster (IPC) activates the lights on warning as requested by the body control module (BCM). The BCM sends a GMLAN
message to the IPC indicating the chime frequency (fast rate) and duration (continuous). The lights on warning sounds when the following occurs:
-
The ignition is OFF.
-
The BCM determines that the driver door is open (signal circuit is low).
-
The BCM determines that the headlamp switch is in the PARK or HEAD position.
Park Brake Warning
The instrument panel cluster (IPC) activates the park brake audible warning as requested by the body control module (BCM). The BCM sends a
GMLAN message to the IPC indicating the chime frequency (fast rate) and duration (continuous). The park brake warning sounds and the brake
indicator illuminates when the following occurs:
-
The ignition is ON.
-
The vehicle speed is greater than 5 km/h (3.1 mph). The BCM receives a GMLAN message from the powertrain control module (PCM) indicating
the vehicle speed.
-
The BCM determines that the park brake is engaged (signal circuit is low).
Turn Signal On Warning
The instrument panel cluster (IPC) activates the turn signal on audible warning as requested by the body control module (BCM). The BCM sends a
GMLAN message to the IPC indicating the chime frequency (single chime in phase with turn signal indicator) and duration (continuous). The turn
signal on warning sounds when the following occurs:
-
The ignition is ON.
-
The BCM detects that the turn signal is active for greater than 1.2 km (0.75 mi). The BCM calculates the distance based on a class 2 message from
the powertrain control module (PCM) indicating the vehicle speed.
Additional Warnings
The following warnings have an associated instrument panel cluster (IPC) indicator:
-
Antilock Brake System
-
Air Bag
-
Brake Warning
-
Charging System
-
High Engine Coolant Temperature
-
Low Fuel
-
Low Engine Oil Pressure
-
Service Vehicle Soon
