Cobalt L4-2.0L SC VIN P (2005)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
1. Remove the right front fender liner.
2. Important: The drive belt tensioner is a hydraulic tensioner with high initial torque. Release slowly to ensure proper operation.
Using an open end wrench, rotate the drive belt tensioner counter clockwise to release the spring tension.
3. Remove the drive belt.
Installation Procedure
1. Using an open end wrench, rotate the drive belt tensioner counter clockwise to release the spring tension.
2. Install the drive belt.
3. Install the right front fender liner.
