Cobalt L4-2.0L SC VIN P (2005)
Intake Air Temperature Sensor: Service and Repair
INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the intake air temperature (IAT) sensor harness connector.
2. Remove the IAT sensor bolt.
3. While twisting the IAT sensor (3), pull the sensor from the engine.
INSTALLATION PROCEDURE
1. Press the IAT sensor (3) into the engine.
2. Install the IAT sensor bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (89 lb in).
3. Connect the IAT sensor harness connector.
