Cobalt L4-2.0L SC VIN P (2005)
15. Remove the battery cable from the remaining body harness clips (2).
16. Pull the interior to engine compartment grommet (1) from the interior in order to release the battery cable from the vehicle.
INSTALLATION PROCEDURE
1. Route the battery cable through the engine compartment pass through and up to the underhood junction.
2. Seat the interior to engine compartment grommet (1) by pulling from the engine compartment side of the battery cable.
3. Install the battery cable to the retaining clips (2).
4. Install the battery cable (2) to the junction block stud.
