Cobalt L4-2.0L SC VIN P (2005)
Battery Tray: Service and Repair
Battery Tray Replacement
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones in Restraint Systems.
2. Disconnect the negative battery cable.
Important: This panel is replaced at factory seams.
3. Remove all related panels and components.
4. Repair as much of the damaged area as possible.
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary.
6. Locate and drill out all the necessary factory welds.