Cobalt L4-2.0L SC VIN P (2005)
Starter Motor: Service and Repair
STARTER MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the intercooler pump outer bracket.
4. Disconnect the electrical connectors (3, 4, 5) from the starter.
5. Remove the starter bolts.
6. Remove the starter.
INSTALLATION PROCEDURE
1. Install the starter.
2. Install the starter bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
