Cobalt L4-2.0L SC VIN P (2005)
1. Install the coil spring and upper strut mount to the J 45400.
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the strut to the coil spring and upper strut mount.
4. Loosely install the strut retaining nut.
5. Notice: Refer to Fastener Notice in Service Precautions.
Use a 45 TORX socket in order to hold the strut shaft. Use a strut rod socket or equivalent to Install the upper strut mount nut.
^
Tighten the strut mount nut to 75 Nm (55 ft. lbs.).
6. Remove the strut from the J 45400.
7. Install the strut to the vehicle.
Suspension Strut Disposal
Suspension Strut Disposal
