Cobalt L4-2.2L (2008)
Important: The front and rear transmission mounts must be allowed to settle with the through bolts loosened.
8. Hand start the front transaxle mount through bolt.
9. Loosen the rear transmission mount through bolt.
10. Tighten the rear transaxle mount to frame bolts.
Tighten the rear bolts to 50 N.m (37 lb ft).
11. Tighten the front and rear transaxle mount through bolts in the following order.
1. Tighten the rear bolt to 100 N.m (74 lb ft).
2. Tighten the front bolt to 100 N.m (74 lb ft).
