chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body - Wind Noise From Door Glass/B-Pillar/Sunroof|Page 15718 > < Body - Wind Noise From Door Glass/B-Pillar/Sunroof|Page 15716
Page 1
background image

Sunroof / Moonroof Panel: Adjustments

Sunroof Window Height and Opening Fit Adjustment

1. Open the sunshade.
2. Close the sunroof window.

3. Loosen the adjusting screws.
4. Adjust the corners of the glass panel (3) using the following guidelines:

*

Adjust the front of the sunroof window (2) flush to 1 mm (0.04 in) below the top surface of the roof panel.

*

Adjust the rear of the sunroof window (1) flush to 1 mm (0.04 in) above the top surface of the roof panel.

Notice:  Refer to Fastener Notice.

5. Install the sunroof window adjustment screws.

Tighten the sunroof window adjusting screws to 6 N.m (53 lb in).

Body - Wind Noise From Door Glass/B-Pillar/Sunroof|Page 15718 > < Body - Wind Noise From Door Glass/B-Pillar/Sunroof|Page 15716