Cobalt L4-2.2L (2008)
Installation Procedure
1. Measure the brake shoe lining thickness.
Brake Shoe Lining Minimum Thickness: 0.5 mm (0.020 in).
2. If the brake shoe lining thickness is at or below the minimum specification, replace the brake shoes.
3. Apply a thin, light coat of high temperature silicone brake lubricant to the brake shoe contact surfaces of the brake backing plate.
4. Position the hook end of the J 38400 (1) under the universal spring and lightly pull the universal spring end out while installing the leading brake
shoe. Ensure that the universal spring engages the brake shoe web hole.
