Cobalt L4-2.2L (2008)
Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
10. Install the adjuster spring (1). Ensure that the loop end of the spring fully engages the tab on the actuator lever.
11. Adjust the drum brakes. Refer to Drum Brake Adjustment (See: Adjustments) .
12. Install the brake drum. Refer to Brake Drum Replacement (See: Brake Drum/Service and Repair/Removal and Replacement) .
13. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
14. Lower the vehicle.
