Cobalt L4-2.2L (2008)
4. Apply a thin coating of high temperature grease GM P/N 12345996 (Canadian P/N 10953501) to the pushrod pin on the brake pedal.
5. Connect the brake pedal pushrod to the brake pedal pivot pin.
6. Install the brake pedal pushrod washer (1).
7. Install the brake pedal pushrod nut (1).
Tighten the nut to 10 N.m (89 lb in).
8. Install the steering column opening filler. Refer to Steering Column Opening Filler Replacement .
